OpenEPM1270 Package B, CPLD Development Board

SKU:5634
Part No.:OpenEPM1270 Package B
Brand:Waveshare

AU$103.69 Out of Stock

PriceQuantity
1
AU$100.662
AU$98.593
AU$97.634+

Details

CPLD development board designed for ALTERA MAX II series, features the EPM1270 onboard, and integrates various standard interfaces, pretty easy for peripheral expansions.

Overview

OpenEPM1270 is a CPLD development board that features the EPM1270 device onboard. It supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with ALTERA MAX II series CPLD devices.

What's On Board

EPM1270 development board on board resource

EPM1270:onboard CPLD device which features:
- Operating Frequency: 50MHz
- Operating Voltage: 1.5-3.3V
- Package: QFP144
- I/Os: 116
- LEs: 1,270, the equivalent to 4,000 logic gates
- Debugging/Programming: JTAG
AMS1117-3.3: 3.3V voltage regulator
Power switch
Power indicator
LEDs: convenient for indicating I/O status and/or program running state
Joystick: five positions
Reset button
Buzzer
8 I/Os interface: for connecting accessory boards
16 I/Os interface: for connecting accessory boards
8 I/Os interface: for connecting accessory boards
32 I/Os interface: for connecting accessory boards

For interface 9-12: it's possible to emulate the interfaces as ONE-WIRE, USART, I2C, SPI, PS/2, etc.

1-WIRE interface: for connecting 1-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
Character LCD interface: for connecting character LCD, such as the LCD1602 (5V Blue Backlight) in Package B
5V DC jack
JTAG interface: for programming/debugging
MCU pins connector: all the MCU pins are accessible on expansion connectors for further expansion
LEDs jumper
Buzzer jumper

For jumper 18-19:

short the jumper to connect to I/Os used in example code
open the jumper to connect to other custom pins via jumper wires

Photos

OpenEPM1270 Development Board

Connecting to LCD1602

Connecting to USB Blaster

Connecting to various peripherals

Connecting to USB UART Board via UART

Connecting to 8 SEG LED Board via 16I/Os

8 Push Buttons on the 8 I/Os interface

Connecting to 5 IO Keypad

4x4 Keypad on the 8 I/Os interface

Connecting to EEPROM Board via I2C

Connecting to VGA PS2 Board

Connecting to any accessory board you need

Note: The OpenEPM1270 does NOT integrate any programming/debugging function, a programmer/debugger is required.

Examples

OpenEPM1270 comes with various examples codes for the supported peripherals, which give you a quick start to develop your own application.

Peripheral	Description	Interface	Verilog	VHDL
AT24CXX	EEPROM	I2C	Y	Y
FM24CXX	FRAM	I2C	Y	Y
DS18B20	Temperature sensor	1-WIRE	Y	Y
SP3232	Serial communication	UART	Y	Y
SP3485	Serial communication	UART	Y	Y
PL2303	USB TO UART	UART	Y	Y
CY7C68013A	USB DEVICE	USB		Y
Buzzer	Sound device	1I/O（PWM）	Y	Y
PS/2 keyboard	Input device	PS/2	Y	Y
Single buttons	Input device	----	Y	Y
4x4 keypad	Input device	8I/Os	Y	Y
Joystick	Input device	5I/Os	Y	Y
LED	Display device	----	Y	Y
8 SEG LED	Display device	13I/Os	Y	Y
VGA monitor	Display device	VGA	Y	Y
Character LCD	Display device	11I/Os	Y	Y

Debugging/Programming Interfaces

The OpenEPM1270 integrates JTAG interface for programming/debugging.

JTAG Signal Names & Description

Pin	Signal Name	Description
1	TCK	Clock signal
2	GND	Signal ground
3	TDO	Data from device
4	VCC(TRGT)	Target power supply
5	TMS	JTAG state machine control
6	NC	No connect
7	NC	No connect
8	NC	No connect
9	TDI	Data to device
10	GND	Signal ground