BB Black/BeagleBone Black, from BeagleBoard family
Overview
BeagleBone Black is an MSRP community-supported development platform for developers and hobbyists. Boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable.
Features
- Processor: TI Sitara AM335x, 1GHz, 2000 MIPS
- 1 GHz ARM® Cortex™-A8
- SGX530 Graphics Engine
- Programmable Real-Time Unit Subsystem
- Memory
- SDRAM: 512MB DDR3L 800MHZ
- eMMC Flash:
- Rev B: 2GB (discontinued)
- Rev C: 4GB (as of 2014.05.21)
- SD/MMC Connector for microSD
- Power management: TPS65217C PMIC is used along with a separate LDO to provide power to the system
- Debug Support: Optional Onboard 20-pin CTI JTAG, Serial Header
- Power Source
- miniUSB USB or DC Jack
- 5VDC External Via Expansion Header
- Connectivity
- High speed USB 2.0 Client port: Access to USB0, Client mode via miniUSB
- High Speed USB 2.0 Host port: Access to USB1, Type A Socket, 500mA LS/FS/HS
- Serial Port: UART0 access via 6 pin 3.3V TTL Header. Header is populated
- 10/100M Ethernet (RJ45)
- User Input / Output
- Reset Button
- Boot Button
- Power Button
- LED power indicator
- 4 user configurable LEDs
- Video/Audio Interfaces
- HDMI D type interface
- LCD interface
- Stereo audio over HDMI interface
- Expansion Interfaces
- LCD, UART, eMMC
- ADC, I2C, SPI, PWM
- Operating Power: [email protected]
- Board Size: 3.4” x 2.1”
Photos
Block Diagram
Dimension
Downloads
Development resources:user manual, Image, schematic, etc.
Download: www.waveshare.com/wiki/BB_Black
Optional Items