Zero-to-Pi3-Adapter (B)

From Waveshare Wiki
Jump to: navigation, search
Zero-to-Pi3-Adapter (B)
Zero-to-Pi3-Adapter (B).png
Zero-to-Pi3-Adapter (A)
Zero-to-Pi3-Adapter (A).png
{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Overview

Introduction

Onboard 4-ch USB interface, Fast Ethernet port and HDMI port, Raspberry Pi Zero 2W To 3B Adapter is an alternative for Raspberry Pi 3 Model B/B+, supporting Zero 2W but not Zero.

Features

Zero 2 w:

  • Broadcom BCM2710A1, Quad Core 64-bit SoC (Arm Cortex-A53 @ 1GHz).
  • 512MB LPDDR2 SDRAM.
  • 2.4GHz IEEE 802.11b/g/n Wireless LAN, Bluetooth 4.2, BLE.
  • Onboard 1 Mirco USB 2.0 port with OTG.
  • Onboard Raspberry Pi 40 Pin GPIO interface pad, suitable for Raspberry Pi series expansion boards
  • MicroSD card slot.
  • Mini HDMI output interface
  • Composite video interface pads, and reset interface pads.
  • CSI-2 Camera Interface.
  • H.264, MPEG-4 encoding (1080p30); H.264 decoding (1080p30).
  • Support OpenGL ES 1.1, 2.0 graphics.


Expansion board:

  • Adopt the pogo pin into the Zero board, which can be inserted directly and conveniently.
  • Its interfaces are easily compatible with the Raspberry Pi 3B series (3B/3B+) board.
  • The module has an onboard USB audio headphone port and an additional speaker port.
  • Onboard 4-way USB expansion port, compatible with USB 2.0/1.1 transmission.
  • Onboard RTL8152B Ethernet chip, support 1 RJ45 network port, 10/100M self-adaptive.
  • Only supports Zero 2 w, not compatible with Zero generation.

Onboard Resource

Zero-to-Pi3-Adapter (B)07.png

Dimensions

Zero-to-Pi3-Adapter (B)03.jpg

Resource

Schematic Diagram

Raspberry Pi Zero W Document

Software

FAQ

Question:Why my mouse and keyboard have no response when using Zero 2W and switching to zero?

 Answer:

As the USB interface of the Zero 2W is different from Zero, you need to add the following content in /boot/config.txt: 

dtoverlay=dwc2,dr_mode=host

Then, it works normally.

{{{5}}}


Question:What is the thread size on this board to screw the pi to it?

 Answer:

The thread size is PM2.5*4.

{{{5}}}


Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Retrieved from "https://www.waveshare.com/w/index.php?title=Zero-to-Pi3-Adapter_(B)&oldid=89702"