USB AVRISP XPII

USB AVRISP XPII ISP

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese: 官网

Onboard Interfaces

Related Products

SKU: USB AVRISP XPII
UPC: 700646946129
Brand: Waveshare

Introduction

• AVR ISP Programmer, compatible with AT AVRISP mkII from ATMEL.
• A professional In-System Programmer. Supports all AVR devices with ISP or PDI interface, including XMEGA.
• Supports AVR Studio 4/5/6 or higher version (delivered with firmware for AVR Studio 5, can be updated to support other AVR Studio versions).

Resources

• User Guide
• Software
• Firmware Upgrade Manually
• Atmel Datasheets

Driver

The driver is installed by itself. If the driver is abnormal or fails to be installed, you can use the following driver. The driver supports only 6.2 or later versions but does not support 7.0.

• USBAVRISPXPII
• USBAVRJTAGICEXPII

FAQ

Question:What are the Similarities and differences between USB AVRISP XPII, USB AVR ISP, and USB AVR ISP PL?

 Answer:

【Simularities】: 1. Support AVR Studio 4, WINAVR(GCC). 2. Support the programmed file by IAR, ICCAVR, and CVAVR. 3. All have ISP download interface (only for downloading programs, not for simulating.)
【Differences】:

{{{5}}}

Question:What is the detailed supporting component list for USB AVRISP XPII?

 Answer:

This product is compatible with AVRISP mkii. Refer to [1]

{{{5}}}

Question:Does it support Win8/8.1/10?

 Answer:

In terms of the hardware, it supports while the computer should install the corresponding AVR Studio software (such as the newest AVR Studio 7).

{{{5}}}

Question:Does USB AVRISP XPII need a driver?

 Answer:

Yes. The USB AVRISP XPII is compatible with the AVRISP MKII, and the driver is the same as the MKII (the driver that comes with the AVR Studio software). After installing the software correctly, connect the downloader, and you can identify the corresponding MKII device under Jungo in the computer device manager.

{{{5}}}

Question:When using the USB AVRISP XPII, sometimes the internal RC clock calibration of the AVR microcontroller cannot be performed. How can I solve it?

 Answer:

It may be that the crystal oscillator is too low. The emergency solution is to change the crystal oscillator in avrispmkII from 12M to 16M (note that this operation must be confirmed with FAE first.)

Note: This method is for the old version of the downloader, the new version has fixed this problem.

{{{5}}}

Question:How to modify the interface language of AVR Studio 6?

 Answer:

{{{5}}}

Question:

 Answer:

When using USB AVRISP XPII under AVR Studio6, there will often be a bug that requires re-plugging and unplugging the USB to be normal. How can I solve it?

Yes, there is such a problem with the software of AVR Studio6 sp1, you can install other versions, such as AVR Studio4 or AVR Studio 7. For a detailed description of this issue, see:

www.avrfreaks.net/forum/atmel-studio-6-programmer-busy

Question:Does it support to program BIN file?

 Answer:

The AVR downloader we provide does not support it.

It only supports the HEX file compiled by the source code.
If you use the HEX file converted by BIN, the file is not supported.

{{{5}}}

Question:Can it read the program on the chip and then copy it to another blank chip?

 Answer:

It can't read the encrypted AVR chip.

{{{5}}}

Question:The AVR Studio software corresponds to the firmware version above the downloader?

 Answer:

*AVR Studio 4.18 ---》1.0d

• Atmel Studio 6.12 --》1.7d
• Atmel Studio 7 --》1.8d

{{{5}}}

Question:What are the common errors and corresponding resolutions in using USB AVRISP XPII or AVRISP MKII?

 Answer:

• Atmel has listed the problem summary and the corresponding resolutions.
• Click here to check: Exhaustive list.

{{{3}}}

{{{4}}}

{{{5}}}

Question:To use the USB AVRISP XPII, is it necessary to install the drive?

 Answer:

Yes, the driver is required. XPII is compatible with MKII, and XPII and MKII share the same driver provided by AVR Studio. After installing the software, you can find the corresponding MKII device under the option Jungo in the Device Manager.

{{{3}}}

{{{4}}}

{{{5}}}

Question:Does this downloader support Win8 OS?

 Answer:

• Yes, it supports, but you should install the latest version of the software provided by Atmel Atmel Studio.
• Click here to check: Exhaustive list

{{{3}}}

{{{4}}}

{{{5}}}

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now