Raspberry Pi PoE+ Injector
| ||
Overview
Introduction
Raspberry Pi PoE+ Injector is designed to add PoE power supply functionality to non-PoE switch ports, with a single-port output of 30W and support for IEEE 802.3af/at network standards. Suitable for various Raspberry Pi PoE HATs
Features and Precautions
- Add PoE power supply function to non-PoE switch ports
- LED indicator, stays on when connected to a powered device, flashes when not connected to a powered device
- Single-port 30W output, supports IEEE 802.3af/at network standards
- Pay attention to IN and OUT, IN connects to the switch, OUT connects to the PoE device
- Power off and flickering LED is a normal phenomenon, wait for the internal electricity to be released completely
Specifications
| Parameter Name | Parameter |
| Input voltage | 100V~240V AC |
| PoE power supply output pin | 4/5 (+), 7/8 (–) |
| Output power | 30W |
| PoE rated output voltage | 55V DC |
| Supported interface types | RJ-45, EIA 568A, EIA 568B |
| Protocol standard | IEEE 802.3af/at PoE Ethernet |
| Rate | 10 / 100 / 1000 (Mbps) |
| LED indicator | PoE power indicator |
| Operating altitude | -300 m to 3000 m |
| Mean Time Between Failures (MTBF) | 200000 hrs, 25℃ |
| Operating temperature / humidity | -10℃ ~ +50℃ / 90% |
| Storage temperature / humidity | -20℃ ~ +70℃ / 95% |
| Product dimensions (length × width × height) |
159 × 51.8 × 33.5 (mm) |
User Guide
Use the Raspberry Pi PoE+ Injector with the Raspberry Pi 5 POE HAT+, as shown in the figure below.
Note
If a power supply limitation prompt appears
Add usb_max_current_enable=1 to /boot/firmware/config.txt
Dimensions
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)