PoE HAT (H)

• 说明
• 资料
• FAQ
• 售后

PoE HAT (H) Raspberry Pi 5 PoE HAT

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: {{{website_en}}} Chinese: {{{website_cn}}}

Onboard Interfaces RPi

Related Products

Overview

Introduction

PoE HAT (H) is a power-over-Ethernet (PoE) expansion board for Raspberry Pi 5, supporting IEEE 802.3af/at network standards Designed to work with PoE routers or switches that support the IEEE 802.3af/at network standards, the Raspberry Pi can achieve both network connectivity and power supply with just a single Ethernet cable.

Features

• Based on Raspberry Pi 40PIN GPIO interface
• Supports Power over Ethernet (PoE), supports IEEE 802.3af/at PoE network standard
• Adopts isolated SMPS (Switching Mode Power Supply)
• Compact and easy to assemble

Specifications

• PoE input voltage: 37V ~ 57V DC input
• PoE-GPIO pin header: 5V 5A (MAX)
• Network standards: Supports IEEE 802.3af/at PoE
• Product size: 56.5 x 65.0 (mm)

Working with Raspberry Pi

Plug PoE HAT (H) into the Raspberry Pi 5 as shown in the figure below:

Note

If a power supply limitation prompt appears

Add usb_max_current_enable=1 to /boot/firmware/config.txt

Installation

The matching Raspberry Pi 5 official shell, as shown in the image below:

The matching Raspberry Pi 5 official radiator, as shown in the image below:

The matching Raspberry Pi CM5 official baseboard, as shown in the image below:

Dimensions

3D Diagram

PoE_HAT_H_3D

FAQ

Question: Can PoE HAT (H) be used on PI4B or PI3B+?

 Answer:

No, PoE HAT (H) only supports PI5

Question: Will PI 5 have a limited current warning?

 Answer:

The Raspberry Pi board will detect the USB power supply current, if it does not reach the maximum current of 5A, the USB output will be limited, because the PoE HAT (H) is powered to the board through 40PIN, there will also be a current limit.

You can add the following statement to the /boot/firmware/config.txt file to remove the current restriction:

usb_max_current_enable=1

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now