PI4-CASE-ARGON-ONE
From Waveshare Wiki
| ||
Introduction
A decent aluminum case for Raspberry Pi 4 with the safe power button.
| More |
User guide
*Note: Please install the case before inserting the SD card!
- The fan and power button can only work with the driver. You can directly refer to the manual which comes with the case.
- Open the terminal of Raspberry Pi, install the driver by the following command:
curl https://download.argon40.com/argon1.sh | bash
- After installation, two shortcuts are added to the desktop, "configure" and "uninstall", and they can be used to configure and uninstall the driver.
- The default setting of the fan is:
| CPU temperature | Fan speed |
|---|---|
| 55°C | 10% |
| 60°C | 55% |
| 65°C | 100% |
- You can also use commands to configure and uninstall the driver:
argonone-config #configure driver argonone-uninstall #uninstall driver
- Power button:
| Raspberry Pi status | Button | Function |
|---|---|---|
| Shutdown | Press | Start |
| Working | Long-press (>3s) | Shutdown |
| Working | Press(<3s) | No function |
| Working | Double-click | Restart |
| Working | Long-press(>5s) | Force shutdown |
- There are some GPIO headers of the Raspberry Pi that are occupied by PI4-CASE-ARGON-ONE:
| PI4-CASE-ARGON-ONE pin occupies | BCM code |
|---|---|
| GPIO ports of Raspberry Pi | 2 3 4 14 22 23 |
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)