OpenEP4CE10-C

[中文]

OpenEP4CE10-C

Introduction

FPGA development board designed for ALTERA Cyclone IV series, features the EP4CE10 onboard, and integrates various standard interfaces, pretty easy for peripheral expansions.

More

Resources

• Schematic: CoreEP4CE10 | DVK600
• Demo Code: Verilog | VHDL | NIOS
• User Manual
• Conveft sof to jic
• Pin Configuration
• Schematic
• Software
• Datasheets

FAQ

Question:How to set Quartus to generate pof?

 Answer:

In assignments -- device -- device and pin option, and in configuration option, check Use Configuration device choose the chip to configure.
Choose the configuration scheme as Active Serial.

{{{5}}}

Question:The newly bought board and downloader program in Quartus, always prompt the following error?

 Answer:

Possible reason:

The version of Quartus 11 (this version is relatively stable) that is supported by the CD is not used. Some users encounter this error when using the version of Quartus 9. After installing version 11, the problem is solved.

{{{5}}}

Question:When using Quartus II to assign pins, it prompts "can't place multiple pins assigned to pin location Pin_101"

 Answer:

Please refer to http://www.51hei.com/bbs/dpj-39976-1.html

{{{5}}}

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now