9.7inch 768x1024 LCD

9.7inch 768x1024 LCD 9.7inch, 768x1024 resolution

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese: 官网

Onboard Interfaces

Related Products

Overview

Introduction

The 9.7-inch 768x1024 LCD is a high-resolution universal capacitive touch screen compatible with most standard HDMI devices.
Featuring a small, thin body, toughened glass panel, excellent display performance, and smooth multi-point touch control effect.
The baseboard comes with fixing nuts for integrated projects.

Feature

• 9.7-inch IPS screen with 768x1024 hardware resolution.
• 10-point capacitive touch, up to 6H hardness toughened glass panel.
• Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
• Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
• Supports HDMI audio output, onboard 3.5mm headphone jack and 4PIN header.

Specification

Item	Description	Unit
Model	9.7inch 768x1024 LCD	/
Dimensions	9.7	Inch
Viewing angle	178	Deg
Resolution	768x1024	Pixels
Touch screen dimensions	177.18(H)×226.15(V)	mm
Display area	147.64(H)×196.61(V)	mm
Pixel pitch	0.192(H)×0.192(V)	mm
Color gamut	70%	NTSC
Brightness (Max)	400	cd/m²
Contrast	900:1	/
Backlight	OSD menu dimming	/
Refresh rate	60	Hz
Display interface	Standard HDMI port	/
Power port	5V Type-C interface	/
Power consumption	4	Watt

Electrical Parameters

Parameter	Min.	Standard	Max.	Unit	Note
Input Voltage	4.75	5.00	5.25	V	Note 1
Input Current	750	800	TBD	mA	Note 2
Operating Temperature	0	25	50	℃	Note 4
Storage Temperature	-20	25	60	℃	Note 4

•Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
•Note 2: The input current should be ≥800mA, otherwise, it will lead to start-up failure or abnormal display, and a long time in an abnormal state may cause permanent damage to the device.
•Note 3: Please do not put the display in a high-temperature and high-humidity storage environment for a long time, the display needs to work within the limit value, otherwise it will be possible to damage the display.

Onboard Interface

User Manual

Working with Raspberry Pi

Hardware Connection

1. Connect the Touch port to the USB port of the Raspberry Pi.
2. Connect the HDMI port to the HDMI port of the Raspberry Pi.

Software Setting

Raspberry Pi OS / Ubuntu / Kali and Retropie systems are supported for Raspberry Pi.
When the LCD works on these systems of Raspberry Pi, the resolution must be set manually, otherwise, it will result in incorrect display resolution and affect the experience.

1. Please download the newest image from the Official Raspberry Pi website.
2. Download the compressed file on the PC and unzip it to get the .img file.
3. Connect the TF card to the PC and use SDFormatter to format the TF card. 4. Open Win32DiskImager, choose the image prepared in the first step, and click "Write" to write the system image.
5. After programming, open the config.txt file in the root directory of the TF card and enter the following codes at the end of config.txt. Then, save and safely eject the TF card.

hdmi_group=2
hdmi_mode=87
hdmi_force_hotplug=1
hdmi_timings=768 0 80 32 60 1024 0 10 10 10 0 0 0 60 0 59400000 0

6. Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, wait for a few seconds normally, and then it will display normally.

Working with PC

Support Windows 11/10/8.1/8/7

1. Connect the Touch interface of the LCD to the USB interface of the PC, and Windows will automatically recognize the touch function.
2. Connect the HDMI interface of the LCD to the HDMI interface of the PC, and Windows will automatically recognize the display function.

• Note:
• Some PCs do not support HDMI devices plug-and-play, usually after rebooting the system can be used normally.
• If the power supply of the USB interface is insufficient, the LCD will flicker, after connecting the external 5V 1A power adapter to the LCD's Power interface, it can be restored to normal use.

Windows Touch Calibration

Take Windows 10 as an example:

• 1. Enter the Windows Settings of the system, type in the search bar, and click "Calibrate the screen for pen or touch input" (as shown in the picture below):

• 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:

• 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.

【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)

Drawing

• 9.7inch 768x1024 LCD 3D Drawing
• 9.7inch 768x1024 LCD 2D Drawing DXF
• 9.7inch 768x1024 LCD 2D Drawing PDF

FAQ

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now