5DP-CAPLCD
| ||
Overview
Introduction
5DP-CAPLCD is a universal capacitive touch screen with high resolution and is compatible with most standard HDMI devices.
It boasts a toughened glass capacitive touch panel that results in a smooth multi-touch effect while being thin and lightweight.
The baseboard has integrated interfaces, which enables users to integrate it into an all-in-one project more conveniently.
Features
- 5-inch IPS screen with a hardware resolution of 1024x600, and the software resolution can reach up to 1920x1080.
- 5-point capacitive touch, with toughened glass panel, hardness up to 6H.
- Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
- Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
- Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.)
- Support HDMI audio output, onboard 3.5mm headphone jack, and 4PIN speaker jack.
Parameters
| Item | Description | Unit |
|---|---|---|
| Model | 5DP-CAPLCD | / |
| Size | 5.0 | Inch |
| Viewing Angle | 178 | Deg |
| Resolution | 1024×600 | Pixels |
| Display Area | 108.03(H)×64.8(V) | mm |
| Pixel Pitch | 0.1055(H)×0.1080(V) | mm |
| Color Gamut | 58% | NTSC |
| Maximum Brightness | 800 | cd/m² |
| Contrast | 800:1 | / |
| Backlight Adjustment | OSD Menu Brightness Adjustment | / |
| Refreshing Rate | 60 | Hz |
| Display Interface | Standard HDMI Interface | / |
| Touch Port | Type-C Interface | / |
| Power Port | Type-C Interface | / |
| Power Consumption | 4.2 | Watt |
Electrical Specifications
| Parameter | Minimum Value | Standard | Maximum Value | Unit | Note |
| Input Voltage | 4.75 | 5.00 | 5.25 | V | Note 1 |
| Input Current | 800 | 850 | TBD | mA | Note 2 |
| Operating Temperature | 0 | 25 | 60 | ℃ | Note 3 |
| Storage Temperature | -10 | 25 | 70 | ℃ | Note 3 |
•Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
•Note 2: The input current must be ≥850mA, otherwise, it will cause startup failure or abnormal display, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
•Note 3: Please do not store the display in a high-temperature and high-humidity environment for a long time. The display must work within the limited value range, otherwise, the display may be damaged.
Onboard Interface
User Guide
Working with Raspberry Pi
How to Assemble
Preparation
Please prepare the following wires. Here we take Raspberry Pi 5 as the connection example:
Step 1
Connect the wires ①②③ to the corresponding position as shown in the picture:
Step 2:
Connect the wire ① to the ④ LCD adapter (select ④ or ⑤ according to your Raspberry Pi model), and then connect it to the micro HDMI interface of Raspberry Pi.
Step 3
Connect the wire ② to the USB interface of the Raspberry Pi; and connect the wire ③ to the 5V GND pin of the Raspberry Pi.
Step 4
After connecting the wires as shown above, check the connection is correct and then connect it to the 5V power supply.
Software Setting
Support Raspberry Pi OS/Ubuntu/Kali and Retropie system. When LCD works with the Raspberry Pi systems, you must set the resolution manually. Otherwise, the resolution is not correct and it will affect your experience.
1. Please download the latest image in the official Raspberry Pi website.
2. Download the compressed file on the PC and unzip it to get the ".img" file.
3. Connect the TF card to the PC and use SDFormatter to format the TF card.
4. Open Win32DiskImager, select the system image prepared in the first step and click "write" to program the system image.
5. After programming, you can open the "config.txt" file in the TF card root directory. Add the following code at the end of "config.txt", save it, and then safely remove the TF card.
hdmi_force_hotplug=1 config_hdmi_boost=10 hdmi_group=2 hdmi_mode=87 hdmi_cvt 1024 600 60 6 0 0 0
6. Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, and wait for a few seconds for a normal display.
Working With PC
Support Windows 11/10/8.1/8/7
How To Use
- Connect the Touch port of the LCD to the USB port of the PC, and Windows will automatically identify the touch function.
- Connect the LCD to the PC via the HDMI interface, and Windows will automatically identify the display function.
- Note:
- Some PCs do not support the plug-and-play function of the HDMI device, but it can be used normally after restarting the system.
- If the power supply of the USB port is insufficient, the LCD will flicker. After connecting an external 5V 1A power adapter to the Power interface of the LCD, it can be operated normally.
Windows Touch Calibration
Take Windows 10 as an example:
- 1. Enter the Windows settings of the system, type in the search bar, and click "Calibrate the screen for pen or touch input" (as shown in the picture below):
- 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:
- 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.
Outline Dimensions
5DP-CAPLCD-H
5DP-CAPLCD-B
5DP-CAPLCD-G
Resource
Drawing
- 5DP-CAPLCD-H
- 5DP-CAPLCD-B
- 5DP-CAPLCD-G
FAQ
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)