10.1DP-CAPLCD

From Waveshare Wiki
Jump to: navigation, search

Overview

Introduction

10.1DP-CAPLCD is a universal capacitive touch screen with HD resolution and is compatible with most standard HDMI devices.
It boasts a toughened glass capacitive touch panel that results in a smooth multi-touch effect while being thin and lightweight.
The baseboard comes with fixing nuts, which enables users to integrate it into an all-in-one project more conveniently.

Features

  • 10.1-inch IPS screen with a hardware resolution of 1280 x 800.
  • 10-point capacitive touch, with tempered glass panel, hardness up to 6H.
  • Using optical bonding touch technology, the display effect is better.
  • Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
  • Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
  • Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.)
  • Support HDMI audio output, onboard 3.5mm headphone jack, and 4PIN speaker jack.

10.1DP-CAPLCD01.png

Parameters

Item Description Unit
Model 10.1DP-CAPLCD /
Size 10.1 Inch
Viewing angle 178 Deg
Resolution 1280 x 800 Pixels
Touch panel dimensions 239.00 (H) × 147.00 (V) × 2 (D) mm
Display panel dimensions 228.6 (H) × 143.0 (V) × 2.60 (D) mm
Display area 135.36 (H) × 216.58 (V) mm
Pixel pitch 0.1175 (H) × 0.1088 (V) mm
Color gamut 58% NTSC
Maximum brightness 350 cd/m²
Contrast 800:1 /
Backlight adjustment OSD menu adjustment /
Refresh rate 60 Hz
DSI port Standard HDMI port /
Power port 5V Type-C /
Power consumption 4 Watt
Weight 538 g

Electrical Specifications

Parameter Minimum Value Standard Maximum Value Unit Note
Input Voltage 4.75 5.00 5.25 V Note 1
Input Current 750 800 TBD mA Note 2
Operating Temperature 0 25 60 ℃ Note 3
Storage Temperature -10 25 70 ℃ Note 3

•Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
•Note 2: The input current must be ≥750mA, otherwise, it will cause startup failure or abnormal display, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
•Note 3: Please do not store the display in a high-temperature and high-humidity environment for a long time. The display must work within the limited value range, otherwise, the display may be damaged.

EDID Sequence Parameter

If the system of the main control board can automatically identify the EDID for display, there is no need to additionally set related sequence parameters.
Otherwise, you can refer to the following EDID settings:

Pixel Clock H Addressable H Blanking V Addressable V Blanking H Front Porch H Sync Width V Front Porch V Sync Width H Image Size V Image Size H Border V Border
77.00 1280 232 800 56 160 32 20 6 294 165 0 0

Interface Introduction

8DP-CAPLCD10.jpg

User Guide

Working With Raspberry Pi

Hardware Connection

  1. Connect the Touch port of the display to the USB port of the Raspberry Pi.
  2. Connect the display to the Raspberry Pi via the HDMI interface.

8DP-CAPLCD010.png

Software Setting

Support Raspberry Pi OS/Ubuntu/Kali and Retropie system.
When LCD works with the Raspberry Pi systems, you must set the resolution manually. Otherwise, the resolution will be wrong and it will affect your experience.

1. Please download the latest image in the official Raspberry Pi website.
2. Download the compressed file on the PC and unzip it to get the ".img" file.
3. Connect the TF card to the PC and use SDFormatter to format the TF card.
4. Open Win32DiskImager, select the system image prepared in the first step and click "write" to program the system image.
5. After programming, you can open the "config.txt" file in the TF card root directory. Add the following code at the end of "config.txt", save it, and then safely remove the TF card. 

hdmi_group=2
hdmi_mode=87
hdmi_cvt 1280 800 60 6 0 0 0
hdmi_drive=1

6. Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, and wait for a few seconds for a normal display.

Linux Software Brightness Adjustment

Using the DDC/CI program, here is an example of the ddcutil tool. 

#Install ddcutil tool:
sudo apt-get install ddcutil -y
#Detect DDC/CI monitor support:
sudo ddcutil detect
#Adjust monitor brightness, <value> should be modified to 0-100 
sudo ddcutil setvcp 10 <value>

For more information about ddcutil function commands, please click here.

Working With PC

Support Windows 11/10/8.1/8/7

How To Use

  1. Connect the Touch port of the LCD to the USB port of the PC, and Windows will automatically identify the touch function.
  2. Connect the LCD to the PC via the HDMI interface, and Windows will automatically identify the display function.
  • Note:
  • Some PCs do not support the plug-and-play function of the HDMI device, but it can be used normally after restarting the system.
  • If the power supply of the USB port is insufficient, the LCD will flicker. After connecting an external 5V 1A power adapter to the Power interface of the LCD, it can be operated normally.

Windows Touch Calibration

Take Windows 10 as an example:

  • 1. Enter the Windows settings of the system, type in the search bar, and click "Calibrate the screen for pen or touch input" (as shown in the picture below):

Win10 touch011.png

  • 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:

Win10 touch02.png

  • 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.
【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)

Win10 touch03.png

Windows Software Brightness Adjustment

  • 1. Download and install DDC/CI applications, such as the open-source Twinkle Tray.
  • 2. Open the software dimming icon, it will recognize the Waveshare monitor and adjust the monitor backlight brightness by sliding the scroll bar.

8HP-CAPLCD Monitor04.png

  • 3. You can also enter the DDC/CI application settings screen to enable contrast adjustment, volume adjustment, and other functions.

8HP-CAPLCD Monito03.png

Outline Dimensions

10.1DP-CAPLCD 02.jpg

Resources

3D Drawings

2D Drawings

FAQ

Question:What speaker is compatible with the speaker header of 10.1DP-CAPLCD, and what is the output power consumption?

 Answer:

It requires 4PIN PH1.25 speaker connector, wiring sequence: ＋ - - +, and supports up to 2 x 2.3W power consumption.

{{{5}}}


Question:How to completely turn off the backlight of the 10.1DP-CAPLCD screen?

 Answer:

Remove the diode shown in the figure and solder it to the upper pad position to control the backlight EN through hardware. 10.1DP CAPLCD FAQ.png

{{{5}}}


Question:How to achieve PWM dimming in 10.1DP-CAPLCD?

 Answer:

Disconnect the resistor in the red box shown in the figure below, and solder the external PWM to the pad indicated by the arrow. 8DP-CAPLCD pwm.png

{{{5}}}


Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Retrieved from "https://www.waveshare.com/w/index.php?title=10.1DP-CAPLCD&oldid=91989"